Clear Plastic Add-On Pocket - Overall Dimensions 2 1/2in high x 5 1/8in wide x 1 1/2in deep
Click the pictures to enlarge   This Add-On Pocket can be added to a WIDE variety of the displays we sell.  This is made of clear plastic. It attaches to displays with white double stick tape.  It could also be wall mounted using the holes shown in the drawing. If you want the factory to add the pocket to a display before shipping, this can only be done with displays that have item number beginning with "AC."  Also, you will need to supply a drawing showing where you want the pocket attached to your display.  And obviously you would have to order the pocket at the same time you are ordering the display.  The factory will do everything they can to match your drawing.  However, you must understand that because this is a process that is done by hand, there may be some slight variations from your drawing and from stand to stand.  (They have done tens of thousands quite successfully, but just in case you need tolerances that only a computer could provide, this is not an option you want to consider.) You can add this pocket to all kinds of displays as you wish - there is nothing magical there.  It is easy if you are a crafty person - just supply your own double stick tape stick it on.
Please read the dimensions carefully.  Make sure you are ordering the size you want.
Item Number	Approximate Overall Dimensions H x W x D
AC1121	2 1/2in high x 5 1/8in wide x 1 1/2in deep

H x W x D = Height (top to bottom) as shown x Width (side to side) as shown x  Depth (front to back) as shown and these are overall dimensions. All dimensions are approximate and subject to change without notice.

E-mail a friend about this item.